Taylor - 121 Speciality Batch Freezer
This special batch freezer is design engineered to create the smoothest, low overrun, super premium ice creams. Become a gourmet chef when it comes to developing your own recipes and standards of quality. Only your imagination is needed to produce those unique flavours and bring them in from miles around.
Features
Freezing Cylinder - One; 10 quart (9.5 litre) capacity from 6-8 quarts (4.7-7.6 litres) of mix.
Mix Hopper - One; 8 quart (7.6 litre) reservoir. Mix flows directly into freezing cylinder through hopper-mounted funnel. With the funnel closed, another measure of mix can be added in preparation for the next batch.
Red Dial Light - Illuminates to tell operator " ice cream is refrigerated ". Light will automatically go out when product is ready.
Automatic Temperature Control - Precise temperature control automatically maintains high quality ice cream. Assures superior product appearance.
Convenient Timer - Operator reminder feature. Timer can be manually set to control specific flavour freezing characteristics for a wide variety of ice cream recipes. Buzzer will sound to remind operator to eject the finished product.
Two-Speed Gear Unit - Unique two-speed gear unit provides slower speed for efficient, thorough blending and faster speed for quick, complete product ejection.
Adjustable Shelf - Three positions for filling large or small containers.
Accessories - Brush Cleaning Kit; Buckets; Chute Plunger; Cleaner/ Sanitizer; Funnel; Hopper Plunger; Taylor Lube; Tune-Up Kit.
Options - Faucet; Knife Door (photo left) ; Refrigeration Timer Control; Spout Door w/o Chute; Tub Locator.
Specifications
| Beater Motor | One; 3.0 HP |
| Refrigeration Unit | One; approximately 12,500 btu/hr compressor. Refrigerant 502. |
| Electrical | Standard is 208/230-60-1 or 208-60-3; however, other electrical characteristics are available. Each unit requires one dedicated electrical connection* - Single Phase Maximum Fuse Size 45 Amps, Minimum Wire Ampacity: 34A.Three Phase Maximum wire Ampacity: 21A. |
| Air Cooled | Clearance: 3" (7.6 cm ) around all sides. |
| Water Cooled | Water inlet and drain connections under side of base 3/8" FPT. |
| Dimensions | Width 18 - 7/16" (46.8cm) x Depth 40 - 1/2" (102.9cm) x Height 55 -1/2" (141cm) Floor Clearance 4-1/8" (10.5cm) mounted on standard casters. |
| Approximate Weights | Net: 485 lbs. (220 Kgs.) Crated 575 lbs. (260.8 Kgs.) 54.8cu ft. (1.5cu m ). |
| * For exact electrical information, always refer to the data plate of the unit. | |
